2-26
Confidential
3.2 Error Message
The error messages displayed on the LCD of the machine and their description are shown in
the table below.
Error message Problem
Error
codes
Refer to:
Access Denied
Function Locked
Failure to authenticate print restriction
ID when PC print is performed
--- 4.4.1
BackCover closed
Open the Back Cover.
When receiving print command from
MP tray with thick paper setting, back
cover sensor detected that the cover
is close state.
9200 2-96
Cartridge Alert
Ink Cartridge expired.To
preserve print quality
install new cartridge.Open
and close cover to clear
alert.
Accumulated hour of use of ink
cartridge exceeded usage regulation
time.
5602 2-68
Cartridge Alert
Non-Brother cartridge
detected.Genuine Brother
cartridge recommended.
Open and close cover to
clear alert.
Data unlikely to be available with
genuine cartridge was received.
(Printing is not prohibited.)
5902 2-70
Cartridge Alert
Recommend using new
cartridge. Cartridge may
leak if repeatedly installed.
The number of times of ink cartridge
insert/remove exceeded its use limit.
5A02 2-70
Cartridge Error
Reinstall the Ink Cartridge.
If the error reappears refer
to the User's Guide for
service options.
When ink cartridge is inserted,
communication error with the ink
cartridge IC was detected.
5502
5702
5B02
5C02
2-68
2-69
2-71
Cartridge Error
Turn the machine OFF and
then back ON. If the error
reappears, Call for Service.
Pre-coat needle sensor detected
error in needle insertion to the
cartridge pre-coat section.
5801 2-69
Ink needle sensor detected error in
needle insertion to the ink cartridge
section.
5802 2-69
Cooling Down
Wait for a while.
Room air temperature detection
thermistor or head temperature
detection thermistor detected
temperature increase over constant
temperature.
6801
6802
2-74
Cover is Open
Close the Top Cover using
both hands.
Top cover sensor detected that it is at
open state.
6001 2-72
To Next Page
Loading...
Need help?
General
Weight and Dimensions
