Brother HL-S7000DN - 11.11 LT Clutch

3-134
Confidential
11.11 LT Clutch
(1) Remove the two Taptite cup S M3x6 SR screws to remove the Upper plate from the LT
frame unit.
Fig. 3-164
(2) Stand the LT frame unit up with the LT frame L at the upper side.
(3) Remove the two Taptite cup S M3x8 SR screws and Collar to remove the Clutch hold
plate and Bushing.
Fig. 3-165
Taptite cup S M3x6 SR
Upper plate
Taptite cup S M3x6 SR
<Back side>
LT frame unit
Taptite cup S M3x8 SR
Clutch hold plate
Collar
Bushing
<Front>
LT frame L