2-70
Confidential
■ Error code 5902
Data unlikely to be available with genuine cartridge was received.
<User Check>
- Reset the ink cartridge.
- Replace the ink cartridge.
■ Error code 5A02
The number of times of ink cartridge insert/remove exceeded its use limit.
<User Check>
- Ignore the indication and continue to use the ink cartridge until it runs out.
- Replace the ink cartridge.
■ Error code 5B00
Registration front sensor detected that the size of printing paper is smaller than the specified
size.
<User Check>
- Replace with the paper with the specified size.
Cartridge Alert
Non-Brother cartridge detected.Genuine Brother cartridge recommended.
Open and close cover to clear alert.
Step Cause Remedy
1 Ink cartridge IC failure Replace the ink refill unit.
2 Engine PCB failure Replace the engine PCB ASSY.
Cartridge Alert
Recommend using new cartridge. Cartridge may leak if repeatedly installed.
Short Paper
Open the Back Cover and then press Go.
Step Cause Remedy
1 Paper feed PCB failure Replace the paper feed PCB ASSY.
2 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
