2-13
Confidential
2101 Detected operational error from
pick-up motor of tray 1.
2-40
2102 Detected operational error from
pick-up motor of tray 2.
2-40
2103 Detected operational error from
pick-up motor of tray 3.
2-40
2104 Detected operational error from
pick-up motor of tray 4.
2-40
2105 Detected operational error of
paper feed motor.
2-41
2200 ---
2201 Detected operational error of
sub tank pump motor.
2-41
2202 Detected operational error of
power fan.
2-41
2203 Detected operational error of
carriage-up motor.
2-42
2204 Detected operational error of
pre-coat head humid motor.
2-42
2205 Detected operational error of
ink head humid motor.
2-42
2206 ---
2207 ---
2300 ---
2301 Detected some sort of error in
engine PCB.
2-43
2302 Time out error occurred in
engine PCB.
2-43
2400 ---
2401 Detected error in EEPROM on
the engine PCB.
2-43
2402 Detected error in the flash ROM
on the engine PCB.
2-43
Error
Codes
Problem
Refer
to:
2403 Correction FPGA (Leo) failure
on the engine PCB
2-43
2404 Recording FPGA (Libra) failure
on the main PCB
2-43
2405 Engine FPGA (Gemini) failure
on the engine PCB
2-44
2408 Overcurrent protection function
worked in power supply PCB.
2-44
2409 Due to malfunction of power
supply PCB, power cannot be
turned ON/OFF at the push of a
button on the control panel.
2-44
2500 ---
2501 Cap does not return to normal
position at maintenance cap
operation.
2-45
2502 Cap home position sensor
error.
2-45
2503 Cap position sensor error. 2-46
2504 Detected operational error of
cap drive motor.
2-46
2600 ---
2601
Unable to detect platen position.
2-46
2602 Platen position sensor detected
platen home position recovery
error.
2-47
2603 Platen upper sensor detected
platen print position move error.
2-47
2604 Platen cap position sensor
detected platen cap position
move error.
2-48
2605 Detected operational error of
platen motor.
2-48
2700 ---
Error
Codes
Problem
Refer
to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
