2-24
Confidential
C000 ---
C100 ---
C200 ---
C300 ---
C401 Within the specified time, plate
sensor of the tray 1 was unable
to detect completion of lift-up.
2-105
C402 Within the specified time, plate
sensor of the tray 2 was unable
to detect completion of lift-up.
2-105
C403 Within the specified time, plate
sensor of the tray 3 was unable
to detect completion of lift-up.
2-105
C404 Within the specified time, plate
sensor of the tray 4 was unable
to detect completion of lift-up.
2-105
C500 ---
C600 ---
C700 Memory is insufficient to deploy
print data.
2-106
C800 ---
C900 ---
CA00 The overcurrent protection
circuit worked when an
off-specification USB device
was inserted into the USB host
terminal.
2-106
CB00 ---
CC00 ---
CD00 ---
CE00 ---
CF00 ---
D000 ---
D100 ---
Error
Codes
Problem
Refer
to:
D200 ---
D300 ---
D400 ---
D500 ---
D600 ---
D700 ---
D800 ---
D900 ---
DA00 ---
DB00 ---
DC00 ---
DD00 ---
DE00 ---
DF00 ---
E000 An error occurred in the ROM
checksum.
2-106
E100 Error occurred in the main PCB
program.
2-106
E200 ---
E300 ---
E400 ---
E600 Error occurred in E2PROM on
the main PCB.
2-107
E700 ---
E800 ---
EA00 ---
EB00 ---
EC00 ---
ED00 Communication with the
wireless LAN module and main
PCB cannot be established
upon startup of the power
supply.
2-107
Error
Codes
Problem
Refer
to:
To Next Page
Loading...
