Canon imageCLASS D530 - Page 288

4
4
4-212
4-212
Disassembly/Assembly > Controller System > Removing the Drive Belt (MF4780w/MF4770n/MF4750/MF4730) > Procedure
Disassembly/Assembly > Controller System > Removing the Drive Belt (MF4780w/MF4770n/MF4750/MF4730) > Procedure
3) Remove the control panel unit[1]
• 4 claws[2]
• 1 at cable[3]
x4
[3][1][2]
[2]
F-4-549
Removing the Drive Belt (MF4780w/MF4770n/MF4750/
MF4730)
■
Preparation
1) Remove the right cover
■
Procedure
1) Close the reader unit [1] and place the host machine with its left side down.
Caution:
Be sure to hold the reader unit rmly when turning the machine with its left side down
because the reader unit will be forced open by hinge spring pressure.
2)Remove the tension unit[1].
• 1 screw[2]
F-4-550