sessions with QoS that are greater than 29000, a different SIP and SPA should be used to map to a different
QFP-3rd-Gen ASIC. This will enable additional schedules and queues.
Features of the Cisco ASR 1000 Series Embedded Services
Processors
The following table summarizes the features of the embedded services processors.
Table 36: Differences in Cisco ASR 1000 Series Embedded Services Processors
Security Traffic
Performance
BandwidthPerformanceMemoryEmbedded Services
Processor
1 Gbps5 Gbps4 Mpps for the
combination of the
following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
256MB Cisco
QuantumFlow
Processor, 5Mb
TCAM, 64 MB
packet buffer, and 1
GB FECP DRAM
Cisco
ASR1000-ESP5
3 Gbps10 Gbps8 Mpps forwarding
for the combination
of the following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
512MB Cisco
QuantumFlow
Processor, 10Mb
TCAM, and 128MB
packet buffer, and 2
GB FECP DRAM
Cisco
ASR1000-ESP10
8 Gbps20 Gbps16 Mpps forwarding
for the combination
of the following
commonly-used
features: IPv4
forwarding, IP
Multicast, ACL,
QoS, Reverse Path
Forwarding (RPF),
load balancing, and
Sampled NetFlow
1 GB Cisco
QuantumFlow
Processor, 40Mb
TCAM, 256 MB
packet buffer, 4 GB
FECP DRAM
Cisco
ASR1000-ESP20
Cisco ASR 1000 Series Router Hardware Installation Guide
94
Cisco ASR 1000 Series Routers Embedded Services Processors
Features of the Cisco ASR 1000 Series Embedded Services Processors
To Next Page
Loading...
Need help?
General
