Cisco ASR 1002-X Hardware Installation Guide

Upgrading to New Software
For a listing of the new SPAs, click the corresponding link in the table.Note
Table 5: Cisco ASR 1000 Series Router Component Software Support
Cisco Hardware ComponentsCisco IOS XE Software Support
•
Cisco ASR 1002 Router
•
Cisco ASR 1004 Router
•
Cisco ASR 1006 Router
•
Cisco ASR 1000 Embedded Services Processors
•
Cisco ASR 1000 Route Processor 1
•
Cisco ASR 1000 SPA Interface Processor
•
Shared Port Adapters
•
1 GB USB Flash Token for Cisco ASR 1000
Series
Cisco IOS XE Release 2.1.0
•
Cisco ASR 1000 Embedded Services Processor
10G Non Crypto Capable (ASR1000-ESP10-N)
•
Cisco ASR1000-ESP20 embedded services
processor
Cisco IOS XE Release 2.2.1
•
Shared Port Adapters
•
Cisco ASR 1000 Series Route Processor 2
(Cisco ASR1000-RP2)
Cisco IOS XE Release 2.3.0
•
Shared Port Adapters
•
Cisco ASR 1002-F Router
Cisco IOS XE Release 2.4.0
•
WebEx SPA
Cisco ASR 1000 Series Router Hardware Installation Guide
26
Cisco ASR 1000 Series Routers Component Overview
Upgrading to New Software

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)