Cisco ASR 1002-X Hardware Installation Guide

CHAPTER 18
MIBs Overview
This document lists the MIBs in Cisco ASR 1001 Router.
•
MIBs for the Cisco ASR 1001 Router, page 661
MIBs for the Cisco ASR 1001 Router
The Cisco ASR 1001 Router can be managed using the following MIBs:
•
MIBs for the Cisco ASR 1001 Router with IDC-HD80G
◦
CISCO-ENTITY-ALARM-MIB
◦
CISCO-ENTITY-FRU-CONTROL-MIB
◦
CISCO-ENTITY-SENSOR-MIB
◦
CISCO-ENTITY-VENDORTYPE-OID-MIB
◦
ENTITY-MIB
◦
ENTITY-SENSOR-MIB
◦
ENTITY-STATE-MIB
•
MIBs for the Cisco ASR 1001 Router with IDC-OC3POS
◦
CISCO-ENTITY-ALARM-MIB
◦
CISCO-ENTITY-FRU-CONTROL-MIB
◦
CISCO-ENTITY-SENSOR-MIB
◦
CISCO-ENTITY-VENDORTYPE-OID-MIB
◦
CISCO-IF-EXTENSION-MIB
◦
CISCO-SONET-MIB
◦
ENTITY-MIB
◦
ENTITY-SENSOR-MIB
Cisco ASR 1000 Series Router Hardware Installation Guide
661

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)