Cisco ASR 1002-X Hardware Installation Guide

Cisco Hardware ComponentsCisco IOS XE Software Support
•
1-Port Clear Channel OC-12 ATM SPA
(SPA-1XOC12-ATM-v2)
Cisco IOS XE Release 2.5.0
•
New XFP/SFPs Supported with SPAs and the
Built-In Gigabit Ethernet Interface
1-Port Channelized OC-12/STM-4 SPA
(SPA-1XCHOC12/DS0)
Cisco IOS XE Release 2.6.0
• Chapter 11, “Cisco ASR 1013 Router Overview
and Installation”
Cisco IOS XE 3.1S (formerly Release 2.7.0)
• Chapter 3, “Cisco ASR 1000 Series Routers
Embedded Services Processors”
• Chapter 4, “Cisco ASR 1000 Series Router SPA
Interface Processors (SIPs)”
• Chapter 12, “Cisco ASR 1001 Router Overview
and Installation”
•
Cisco ASR1000-ESP40 and Cisco
ASR1000-SIP40 support on Cisco ASR 1004
Router
Cisco IOS XE 3.2S (formerly Release 2.8.0)
• Chapter 10, “Cisco ASR 1002-X Router
Overview and Installation”
•
Cisco ASR1000-ESP100 support on Cisco ASR
1006 Router and Cisco ASR 1013 Router
Cisco IOS XE 3.7S
Supported ASR 1000 Hardware Components
This section contains the following topics:
Cisco ASR 1000 Series Router Hardware Installation Guide
27
Cisco ASR 1000 Series Routers Component Overview
Supported ASR 1000 Hardware Components

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)