Cisco ASR 1002-X Hardware Installation Guide

Connecting the Network Management and Signal System Cables
The Cisco ASR 1004 Router has connections to both the internal Ethernet management network and the
external data network.
•
T
he internal Ethernet management network connections are made through an Ethernet port on the front
panel of the Cisco ASR 1000 Series Route Processor 1.
•
The external data network connections are made through front panel ports on several types of SPAs.
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1004 Router:
•
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
•
Verify all cabling limitations (particularly distance) before powering on the system.
Cisco ASR 1000 Series Router Hardware Installation Guide
218
Cisco ASR 1004 Router Overview and Installation
Connecting the Network Management and Signal System Cables

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)