Cisco ASR 1002-X Hardware Installation Guide

CHAPTER 16
Cisco ASR 1000 Series Router Route Processor
and Embedded Services Processor Signals and
Pinouts
This appendix contains the following sections:
•
Cisco ASR 1000-RP1 Pinout Specifications, page 637
•
Cisco ASR1000-RP2 Pinout Specifications, page 639
•
Cisco ASR1000-ESP40 Console Port Pinout Specifications, page 642
•
Cisco ASR1000-ESP100 Console Port Pinout Specifications, page 642
•
Cisco ASR1000-ESP200 Console Port Pinout Specifications, page 643
Cisco ASR 1000-RP1 Pinout Specifications
The following tables list the pinouts for the ports on the Cisco ASR1000-RP1.
MGMT Ethernet Port Signals and Pinouts
The following table lists the Management Ethernet 10/100 RJ-45 port pinouts.
Table 127: RJ-45 Management Ethernet Port Pinouts
DescriptionDirectionSignalPin
Transmit DataOutputTX Data+1
Transmit DataOutput
TX Data–
2
Receive DataIputnRX Data+3
——
NC4, 5
Cisco ASR 1000 Series Router Hardware Installation Guide
637

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)