Cisco ASR 1002-X Hardware Installation Guide

The following table lists the Cisco ASR 1006 Router physical specifications.
Table 95: Cisco ASR 1006 Router Specifications
SpecificationDescription
Connects the Cisco ASR 1000 Series RP1, Cisco ASR 1000 Series
ESP, Cisco ASR 1000 Series SPA Interface (SIP), SPAs, and
power supplies together in the system
Midplane
Height = 10.5 in. (25.4 cm)
Width = 17.25 in.(43.815 cm)
Depth = 22.50 in. (57.15 cm)
Dimensions (H x W x D)
•
Fully loaded chassis: 109.1 pounds (49.5 kg)
•
Only chassis: 25 pounds (11.33kg)
Using the Cisco ASR1000-ESP100 instead of the Cisco
ASR1000-ESP40 adds 2.1 lbs to the total weight of the
router.
Note
Weight
•
41° to 104° F
•
5° to 40° C
Nominal operating temperature
10% to 85%Nominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum DC: 1700W
•
Maximum AC: 1600W
•
Maximum (Out): 1275W
Power consumption
Cisco ASR 1006 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1006 Router.
Table 96: Memory and Storage Options for Cisco ASR 1006 Router
Maximum System SupportDefaultMemory Type
4 GBDRAM2 GB DRAMRP1
Cisco ASR 1000 Series Router Hardware Installation Guide
616
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1006 Router Memory and Storage Options

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)