Cisco ASR 1002-X Hardware Installation Guide

What to Do Next
You can install your Cisco AR1006 chassis on a two-post rack or a four-post rack. See the Two-Post Rack
Installation, on page 381 and the four-post rack installation, go to the Four-Post Rack Installation, on page
383.
Two-Post Rack Installation
The Cisco ASR 1013 Router can be installed on a two-post 19-inch equipment rack. The following image
shows the Cisco ASR 1013 Router installed on a two-post rack.
Figure 183: Installing the Cisco ASR 1013 Router on a Two-Post Rack
Cisco ASR 1000 Series Router Hardware Installation Guide
381
Cisco ASR 1013 Router Overview and Installation
Two-Post Rack Installation

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)