Cisco ASR 1002-X Hardware Installation Guide

CHAPTER 10
Cisco ASR 1002-X Router Overview and
Installation
This chapter describes the Cisco ASR 1002-X Router and details the procedures for installing the router on
an equipment shelf, tabletop, or an equipment rack.
This chapter contains the following sections:
•
Cisco ASR 1002-X Router Description, page 318
•
Installation Methods, page 331
•
General Rack Installation Guidelines, page 331
•
Guidelines for an Equipment Shelf or Tabletop Installation, page 332
•
Equipment Shelf or Tabletop Installation Procedure, page 333
•
Rack-Mounting the Cisco ASR 1002-X Router, page 335
•
Attaching the Chassis Rack Mount Brackets, page 337
•
Installing the Cisco ASR 1002-X Router in a Rack, page 340
•
Attaching the Cable Management Bracket, page 345
•
Attaching a Chassis Ground Connection, page 346
•
Connecting the SPA Cables, page 349
•
Connecting the Console and Auxiliary Port Cables, page 350
•
Cisco ASR 1002-X Router Power Supplies, page 351
•
Connecting a Terminal to the Console Port, page 362
•
Connecting External Cables to the Cisco ASR 1002-X Router, page 364
Cisco ASR 1000 Series Router Hardware Installation Guide
317

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)