Cisco ASR 1002-X Hardware Installation Guide

Preface
This preface describes the objectives and organization of this document and explains how to find additional
information on related products and services. This preface contains the following sections:
•
Document Revision History, page xxi
•
Document Objectives, page xxiii
•
Audience, page xxiii
•
Document Organization , page xxiv
•
Conventions, page xxv
•
Safety Warnings and Cautions, page xxvii
•
Related Documentation, page xxxiii
•
Obtaining Documentation and Submitting a Service Request, page xxxiv
Document Revision History
The Document Revision History table below records technical changes to this document.
Change SummaryDate
Added information about Cisco ASR1000-ESP200.July 2013
Added information about Cisco ASR 1002-X Router,
Cisco ASR1000-ESP100, and support for Cisco
ASR1000-SIP40 on all routers that support Cisco
ASR1000-SIP10.
Information about these new features has been added
in various sections in this guide.
July 2012
Cisco ASR 1000 Series Router Hardware Installation Guide
xxi

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)