Cisco ASR 1002-X Hardware Installation Guide

Change SummaryDate
Added information about:
•
IDC-HD80G, IDC-4XGE, and IDC-CHT1/E1
integrated daughter cards on the Cisco ASR
1001 Router—See the Cisco ASR 1001 Router
Description, on page 407 for detailed
information.
• MIBs for the new IDCs—See the MIBs for the
Cisco ASR 1001 Router, on page 661 appendix
for the list of MIBs.
•
Cisco ASR 1013 Router power supplies on the
Cisco ASR 1006 Router—Information about
this new feature has been added in various
sections in this guide.
March 2011
Added information about:
•
New Cisco ASR 1001 Router at Cisco ASR
1001 Router Description, on page 407
•
Cisco ASR1000-SIP40 and Cisco
ASR1000-ESP40 products on the Cisco ASR
1004 Router
November 2010
Added information about Cisco ASR 1000 Series
Routers 40G products:
•
Cisco ASR 1013 Router Overview and
Installation
•
Cisco ASR 1000-ESP40, on page 89
•
Supported ASR 1000 Hardware Components,
on page 27
July 2010
Added information about the Cisco +24 VDC power
supply in the Cisco ASR 1002 Router. See the
following sections:
•
Cisco ASR 1002 Router +24 VDC Power
Supply, on page 71
•
Removing and Replacing the Cisco ASR 1002
Router Power Supplies, on page 565
•
November 2009
Cisco ASR 1000 Series Router Hardware Installation Guide
xxii
Preface
Document Revision History

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)