ASR 1013ASR 1006ASR 1004ASR 1002-XASR 1002ASR 1002-FASR 1001Component
—
Single or
Dual
ASR1000-RP1
Single
ASR1000-RP1
Single
integrated
route
processor
Single
integrated
ASR1000-RP1
Single
integrated
ASR1000-RP1
Single
integrated
route
processor
Route
Processor
Single or
Dual
ASR1000-RP2
Single or
Dual
ASR1000-RP2
Single
ASR1000-RP2
———
ASR1000-SIP10ASR1000-SIP10ASR1000-SIP10Integrated
SIP
Integrated
SIP
Integrated
SIP
Integrated
SIP
SIP
ASR1000-SIP40ASR1000-SIP40ASR1000-SIP40
——
241283 HH SPA
bays
311
half-height
(HH) SPA
bay
SPA Slots
Cisco ASR 1000 Series Hardware Configuration Combinations
This section provides Cisco ASR 1000 Series hardware configuration combinations and whether they are
supported from Cisco IOS XE Release 3.1S onward. The tables list the router and the route processor, SIPs,
and power modules supported on that router. The tables include the following categories
• Supported hardware before IOS XE Release 3.1S—xref table
• Supported hardware from IOS XE Release 3.1S—xref table
• Requires upgrade—xref table
• Not compatible—xref table
• Not supported in IOS XE Release 3.1S—xref table
• Incompatible HA—xref table
When an unsupported combination of hardware components occurs, the card or cards not supported are
shutdown and an error message occurs. Following each table in this section, a description of the error
message is provided.To prevent any errors from occurring, read the compatibility tables before you insert
any Cisco ASR 1000 Series Router components on a router running Cisco IOS XE Release 3.1S or later
releases.
Note
Cisco ASR 1000 Series Router Hardware Installation Guide
29
Cisco ASR 1000 Series Routers Component Overview
Cisco ASR 1000 Series Hardware Configuration Combinations
To Next Page
Loading...
Need help?
General
