Cisco ASR 1002-X Hardware Installation Guide

SpecificationDescription
Nominal 5° to 40° COperating temperature
10% to 90% non-condensingNominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum (DC): 500 W
•
Maximum (AC): 471 W
•
Maximum (Out): 400 W
Power consumption
Cisco ASR 1001 Router Memory and Storage Options
The following table lists the hardware memory and storage options supported on the Cisco ASR 1001 Router.
Table 126: Memory and Storage Options for Cisco ASR 1001 Router
Maximum System SupportDefaultMemory Type
1 GB DRAM maximum1 GB DRAM defaultESP
16 GB DRAM maximum
• Cisco ASR 1001 Route Processor
comes with 4 GB DRAM (default)
• Cisco ASR 1001 offers 8 GB
Embedded USB memory (EUSB)
support (partitioned: two 32-MB
for nonvolatile RAM [NVRAM]
and the rest for mass storage)
Route Processor
—
1 GB USB flash memory supportExternal USB flash memory
Cisco ASR 1000 Series Router Hardware Installation Guide
636
Cisco ASR 1000 Series Router Specifications
Cisco ASR 1001 Router Memory and Storage Options

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)