Cisco ASR 1002-X Hardware Installation Guide

CHAPTER 9
Cisco ASR 1002-F Router Overview and
Installation
This chapter describes the Cisco ASR 1002-F (Fixed) Router and provides procedures for installing the Cisco
ASR 1002-F Router on an equipment shelf or tabletop or in an equipment rack, and describes how to connect
interface and power cables.
This chapter contains the following sections:
•
Cisco ASR 1002-F Router Description, page 276
•
Cisco ASR 1002-F Router Components, page 279
•
Installation Methods, page 286
•
General Rack Installation Guidelines, page 287
•
Guidelines for an Equipment Shelf or Tabletop Installation, page 288
•
Equipment Shelf or Tabletop Installation, page 289
•
Rack-Mounting the Cisco ASR 1002-F Router, page 291
•
Attaching the Chassis Rack-Mount Brackets, page 293
•
Installing the Cisco ASR 1002-F Router in a Rack, page 296
•
Attaching the Cable-Management Bracket, page 300
•
Attaching a Chassis Ground Connection, page 302
•
Connecting the Shared Port Adapter Cables, page 305
•
Connecting the Console and Auxiliary Port Cables, page 305
•
Connecting a Cable to the Management Ethernet Port, page 306
•
Connecting Power to the Cisco ASR 1002-F Router, page 306
•
Connecting a Terminal to the Cisco Integrated RP Console Port and Auxiliary Port, page 314
•
Connecting Cables, page 315
Cisco ASR 1000 Series Router Hardware Installation Guide
275

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)