Cisco ASR 1002-X Hardware Installation Guide

Table 46: Cisco ASR 1000 Series Router Installation Checklist
DateVerified ByTask
Date chassis received
Chassis and all accessories
unpacked
Types and numbers of interfaces
verified
Safety recommendations and
guidelines reviewed
Installation Checklist copied
Site log established and
background information entered
Site power voltages verified
Site environmental specifications
verified
Required passwords, IP addresses,
device names, and so on, available
Required tools available
Network connection equipment
available
Cable-management brackets
installed (optional, but
recommended)
AC power cable(s) connected to
AC source(s) and router
DC power cable(s) connected to
DC source(s) and router
Network interface cables and
devices connected
System power turned on
System boot complete (STATUS
LED is on)
Cisco ASR 1000 Series Router Hardware Installation Guide
137
Preparing Your Site for Installation
Cisco ASR 1000 Series Router Installation Checklist

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)