EasyManuals Logo

Cisco ASR 1002-X Hardware Installation Guide

Cisco ASR 1002-X
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #170 background imageLoading...
Page #170 background image
DescriptionComponent
Front and rear chassis rack-mount brackets that you
will attach to the chassis with the respective screws
Accessories Kit
You must order the Accessories Kit
separately if you order the Cisco ASR
1009-X Router or Cisco ASR 1006-X Router
chassis as a spare.
Note
Three sets of screws, one set for:
Front rack-mount brackets (use the black
screws)
Rear rack-mount brackets (use the package with
the 5 screws)
Cable-management brackets (use the package
with the 4 screws)
Two cable-management brackets with U-feature
design devices attached, with a different size for each
chassis.
1 RJ-45 to RJ-45 crossover cable
1 RJ-45 to DB-9 (female) adapter
One disposable wrist strapESD, Wrist Strap (disposable)
Regulatory Compliance and Safety Information for
the Cisco ASR 1000 Series Aggregation Services
Routers at http://www.cisco.com/c/en/us/td/docs/
routers/asr1000/rcsi/asr1rcsi.html.
Documentation
Power cord if an AC power supply was shipped.
There are none for the DC power supply units.
Optional Equipment
Most Cisco documentation is online or on the Cisco Documentation DVD. Documentation that ships with
your Cisco ASR 1000 Series Router includes the Regulatory Compliance and Safety Information for the
Cisco ASR 1000 Series Aggregation Services Routers document, and the Documentation Roadmap for
Cisco ASR 1000 Series, which provides links and information for the Cisco ASR 1000 Series Aggregation
Services Routers documentation.
Note
Cisco ASR 1000 Series Router Installation Checklist
To assist you with your installation and to provide a historical record of what was done by whom, photocopy
the Cisco ASR 1000 Series Router Installation Checklist shown in the following table. Use this to record
when each procedure or verification is completed. When the checklist is completed, place it in your site log
along with the other records for your new router.
Cisco ASR 1000 Series Router Hardware Installation Guide
136
Preparing Your Site for Installation
Cisco ASR 1000 Series Router Installation Checklist

Table of Contents

Other manuals for Cisco ASR 1002-X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1002-X and is the answer not in the manual?

Cisco ASR 1002-X Specifications

General IconGeneral
Form FactorRack-mountable
Rack Units2RU
Integrated ServicesYes
Maximum Memory16 GB
Built-in Gigabit Ethernet Ports6
Input Voltage100-240 VAC
Operating Temperature32 to 104°F (0 to 40°C)
RedundancyPower supply redundancy
Network Interface ModulesUp to 4 SPA/SIP slots
Embedded Services Processor (ESP)ESP-20
Maximum Packet per Second (PPS)15 Mpps
Height3.5 inches
Fixed Ports6 GE ports
Memory4 GB (default), 16 GB (maximum)
Power SupplyDual power supplies (AC or DC)
Dimensions (H x W x D)3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)

Related product manuals