Cisco ASR 1002-X Hardware Installation Guide

The following image shows the forward rack-mount brackets, callout number 2 and the rear rack-mount
brackets, callout number 4, on the Cisco ASR 1013 Router.
Figure 182: Forward Rack-Mount Brackets on the Cisco ASR 1013 Router
Rear rack-mount bracket4Forward rack-mount
bracket ear and holes
2
Cisco ASR 1000 Series Router Hardware Installation Guide
378
Cisco ASR 1013 Router Overview and Installation
Installing the Cisco ASR 1013 Router in a Rack

Cisco ASR 1002-X Specifications

General

Form Factor	Rack-mountable
Rack Units	2RU
Integrated Services	Yes
Maximum Memory	16 GB
Built-in Gigabit Ethernet Ports	6
Input Voltage	100-240 VAC
Operating Temperature	32 to 104°F (0 to 40°C)
Redundancy	Power supply redundancy
Network Interface Modules	Up to 4 SPA/SIP slots
Embedded Services Processor (ESP)	ESP-20
Maximum Packet per Second (PPS)	15 Mpps
Height	3.5 inches
Fixed Ports	6 GE ports
Memory	4 GB (default), 16 GB (maximum)
Power Supply	Dual power supplies (AC or DC)
Dimensions (H x W x D)	3.5 x 17.5 x 19.0 in (8.9 x 44.5 x 48.3 cm)