• For the Cisco Business Edition 3000 Administrative Interface, see Step 7.
Step 2
If you plan to use the use the Cisco-provided .xls data configuration file in the Cisco Business Edition 3000
First Time Setup Wizard, add the configuration data for the user(s) to the Cisco-provided .xls data configuration
file.
Step 3
Verify that the data is correct in the Cisco-provided .xls data configuration file.
Step 4
After you have entered all configuration data that you want to upload to the system in the Cisco-provided .xls
data configuration file, upload the Cisco-provided .xls data configuration file on the Select Setup Mode page
in the Cisco Business Edition 3000 First Time Setup Wizard. You can upload the file from a USB flash drive
or from your desktop.
Select Automatic Setup.
If you are uploading from a USB flash drive, ensure that you insert the USB flash drive into the port
on the Cisco Business Edition 3000 server.
Tip
Step 5
After you upload the Cisco-provided .xls data configuration file to the server, the Cisco Business Edition 3000
First Time Setup Wizard takes you to the Summary page.
After the server reboots, log into the Cisco Business Edition 3000 Administrative Interface.
Step 6
The Post-Setup wizard allows you to immediately insert the user and phone configuration.
Click Import Users/Phones.
Step 7
If you have already completed the Cisco Business Edition 3000 First Time Setup Wizard, you can add a user
to the system by performing one of the following methods in the Cisco Business Edition 3000 Administrative
Interface:
• Select Users/Phones > Users to add a single or multiple users.
In the user page, create the extensions, speed dials, username and password, and so on. In addition, you
must select a usage profile. Verify that you have configured a usage profile that works for the user and
phone.
• To add multiple users from the Cisco-provided .xls data configuration file, select Users/Phones > Users.
After you verify that the information in the Cisco-provided .xls data configuration file is correct, click
Import Users/Phones in the Search Users page.
To edit or delete user configuration, select Users/Phones > Users in the Cisco Business Edition 3000
Administrative Interface.
Tip
Adding a Phone for a User
You can add a phone by using one of the following methods:
• Through the Cisco-provided .xls data configuration file in the Cisco Business Edition 3000 First Time
Setup Wizard (for initial deployment)
• Through the Cisco-provided .xls data configuration file in the Cisco Business Edition 3000 Administrative
Interface (after initial deployment)
• Under Users/Phones > Phones in the Cisco Business Edition 3000 Administrative Interface (after initial
deployment)
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 141
Adding a Phone for a User
To Next Page
Loading...
Need help?
General
