Cisco IE-3000-8TC Administration Guide

Text displays in English not in my chosen locale
Problem One of the following issues may have occurred:
• You selected English_United States for the locale in the Cisco Business Edition 3000 First Time Setup
Wizard. (You cannot change the locale after you set it in the Cisco Business Edition 3000 First Time
Setup Wizard.)
• Your browser is set to display English.
• You are running a release of the Cisco Business Edition 3000 software, for example, a software patch,
and new text is not localized in the version that you are running.
Solution Perform any of the following tasks:
• Set your browser to the locale that you are using with the system. (To determine your locale, select
System Settings > Date/Time.)
• After the new text is localized, upgrade to a version of the software that contains the localized text.
The restore of data failed
Problem One of the following issues may have occurred:
• The software version that was running during the backup was not the exact same software version that
was running during the restore.
• After the backup, you changed the hostname of the server before you ran the restore.
• A problem occurred with the SFTP server.
Solution Perform any of the following tasks:
• Verify that the software version that is running during the restore exactly matches the software version
that was running when you ran the backup.
• Verify that the hostname of the server was not changed before you ran the restore. The restore fails if
the hostname that is included in the backup tar file does not match the hostname that is configured on
the server.
• If you used a SFTP server, verify that the network connection is good. Verify that you entered the user
credentials correctly on the Restore page. Verify that you have space on the SFTP server. Verify that
you have access to the folder on the SFTP server where the backup tar file is stored.
Cannot delete SPA8800 phone/connection
Problem Cannot delete SPA8800 phone/connection. Either the Phone 1 or the Line 1 port must be configured
on SPA8800 devices.
Solution Perform any of the following tasks:
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
448 OL-27022-01
Text displays in English not in my chosen locale

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes