Cisco IE-3000-8TC Administration Guide

Reimage the system using the Cisco Business Edition 3000 DVD that ships with the unit and restore
from backup. For information on how to reimage the MCS 7890-C1, refer to Reimaging an MCS
7890-C1, on page 453.
A.
How do I configure a Cisco Jabber client?
Q.
Cisco Jabber clients are configured as Phones in the Phones configuration window, which can be accessed
by selecting Users/Phones > Phones. The Adding a Phone for a User, on page 141 procedure describes
how to add a phone within Cisco Business Edition 3000.
A.
For configuration specific to Cisco Jabber clients, make sure to do the following:
• Choose Cisco Unified Services Client as the Phone Type
• Enter a unique name for the Cisco Jabber client in the Identifier field on the Add a Phone window.
The Identifier is the name that Cisco Business Edition 3000 assigns to the Cisco Jabber client. The
XML device configuration file that the TFTP service sends to the Cisco Jabber client during the
registration process is given the name you assign in this field.
How will internal users access Auto Attendant who has Voicemail enabled in their Usage Profiles?
Q.
Perform the following procedure to reach auto attendant:
A.
1
User A presses the voice mail box or dials the Auto Attendant pilot
extension.
The User A reaches the voice mailbox prompt.
2
User A dials “#” to reach Auto Attendant.
To sign in to the Cisco Business Edition 3000 interfaces and to perform other configuration tasks, see the
following sections:
• Signing in to the Cisco Business Edition 3000 First Time Setup Wizard, page 67
• Signing in to the Cisco Business Edition 3000 Administrative Interface, page 67
• Signing in to the Cisco Business Edition 3000 User Preferences Interface, page 68
• Accessing the Icons on the Page, page 68
• Accessing the Buttons On the Page, page 69
• Finding Your Configuration, page 69
• Deleting Your Configuration, page 70
• Adding Your Configuration, page 71
• Editing Your Configuration, page 71
• Copying (Duplicating) Configuration, page 72
• MCS 7890-C1 will not power up. Why not?, page 72
• Connecting a USB DVD Drive, page 73
• Disconnecting a USB DVD Drive, page 73
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
66 OL-27022-01

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes