Cisco IE-3000-8TC Administration Guide

Procedure
Step 1
Enable Cisco Extension Mobility in the usage profile.
Step 2
Assign the usage profile to the user. Assign an extension to the user.
Step 3
Add the phone, if it has not already been added to the Cisco Business Edition 3000 Administrative Interface.
Step 4
Assign the extension to Line 1 on the phone. The user ID displays in the owner field in the Phone page after
you assign the extension.
Setting Up Do Not Disturb
Perform the following procedure to set up do not disturb.
Procedure
Step 1
Enable it in the Phone page in the Cisco Business Edition 3000 Administrative Interface.
Select Users/Phones > Phones.
Step 2
Configure system settings in the Voice Features Settings page in the Cisco Business Edition 3000
Administrative Interface.
Select System Settings > Voice Feature Settings.
Setting Up Meet-Me Conferences
Perform the following procedure to configure Meet-Me conferences.
Procedure
Step 1
Configure the feature code in the dial plan.
Step 2
Enable the conference bridge in the Sites pages.
Step 3
To translate a Meet-Me conference number to an extension in your dial plan, set up a translation rule in the
Dial Plan page in the Cisco Business Edition 3000 Administrative Interface.
Setting Up Music On Hold
Perform the following procedure to set up music on hold.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 147
Setting Up Do Not Disturb

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes