CHAPTER 14
Backup Settings
The following table describes the settings that display on the Backup page (Maintenance > Backup), which
allows you to run a backup immediately. Running a backup ensures that you store your important data to a
remote location, such as a USB hard disk or SFTP server. To restore data after a system failure, for example,
if you must reinstall or replace a server, you must have access to a backup tar file that matches the Cisco
Business Edition 3000 software version that is running on your server. The backup does not back up your
call detail records. To save call detail records, you must export them in .csv format. (Monitoring > Call
Detail Reports)
Table 28: Settings on the Backup page
DescriptionSetting
To store your tar file to a USB hard disk, click
Storage Device Connected to System USB Port
and browse to the location where you want to store
the file.
When you back up to a USB hard disk, the system
analyzes whether you have enough space to run the
backup. If you do not have enough space, a message
displays on the page.
Storage Device Connected to System USB Port
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 181