Cisco IE-3000-8TC Administration Guide

Calling Party Transformations Settings
Table 72: Edit Calling Party Transformations Settings
DescriptionField
Select the PSTN connection from the drop-down list and click Load to load the
calling party transformation. The details of the selected PSTN connection appear
under the respective fields.
Click Reset to remove the connection from which the calling party transformation
is selected.
Click Load again to load the calling party transformation from the PSTN connection
with the updated changes during the interim.
The transformation pattern appears in the Dial Plan Patterns area.
If there are no other sites configured in the system, the option to load a
connection will not be available.
Note
Copy from Connection
In the text box, enter a digit pattern for the calling number. Cisco Business Edition
3000 checks the digits in the calling number against each of the Inbound Calling
Number patterns, beginning with the top pattern, until a match is found.
If the calling number matches the Inbound Calling Number pattern, Cisco Business
Edition 3000 applies the subsequent digit transformations in the Remove First
Digits and Prefix with Digits fields against the calling number before forwarding
the call.
If the calling number does not match any of the Inbound Calling Number patterns,
Cisco Business Edition 3000 forwards the call without applying a calling party
transformation.
Inbound Calling
Number
From the drop-down list, select the number of first digits to be removed from the
calling party number.
Remove First Digits
Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries for the
NANP include the digits 0 through 9; the wildcard characters asterisk (*) and
octothorpe (#); the international escape character +; and blank.
Prefix With Digits
Specifies the calling party number displayed on the phone.Displayed on Phone
Click to save the calling party transformation.OK
Click to cancel the changes made to the calling party transformation.Cancel
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
310 OL-27022-01
Calling Party Transformations Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes