Cisco IE-3000-8TC Administration Guide

CHAPTER 46
User Settings
GUI: Cisco Business Edition 3000 Administrative Interface
User settings also display in the Cisco-provided .xls data configuration file.Tip
In the Cisco Business Edition 3000 Administrative Interface, you can add, edit, and delete user configuration.
The following table describes the settings that display on the User page (Users/Phones > Users), which
allows you to add and edit user configuration.
Before you add a user, determine whether the user can act as an administrator of the system. All users can
use the phones and access the Cisco Business Edition 3000 User Preferences Interface where they can manage
some phone features and functionality, such as speed dials and so on. Administrators, though, can administer
the entire system, including but not limited to monitoring the system, and adding, updating, and deleting
phones, users, and so on. Administrators can access all pages in the Cisco Business Edition 3000
Administrative Interface and Cisco Business Edition 3000 User Preferences Interface and perform all duties
that are necessary to administer the system. When you configure a user, you specify whether the user is an
administrator.
Before you can add a phone (Users/Phones > Phones), you must add an extension to the user.Tip
Table 96: Settings on the Users page
DescriptionSetting
General Tab Information
Enter the first name of the user. Enter up to 64 characters, except for quotation
marks (").
First Name
Enter the last name of the user. Enter up to 64 characters, except for quotation
marks (").
Last Name
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 385

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes