DescriptionSetting
Enter the email address of the user. In this field, enter a valid email address that
includes the domain for the user; for example, <user>@<domain>.com.
This email address works with the Reset Credentials button, which displays in
the Edit User page.
For Voicemail Notification feature, if you have enabled Allow user to
notify new voicemail through email in Usage Profile, and if the email
address field is empty, the following error message appears: "The
selected Usage Profile requires an email address to be configured for
this user."
Note
E-mail Address
Select the usage profile that you want to assign to the user. The usage profile
that you select gives rights to the user, such as the ability to use certain calling
features if the phone supports the feature.
Usage Profile
This field is displayed only if the Dial by Name feature is enabled for the internal
callers only or for all the callers.
Dial by Name Status
Enter the unique identification name for the user. You can enter any character,
including alphanumeric and special characters. No character restrictions exist
for this field.
Each user ID must be unique; you cannot create two users that have the same
user ID.
Enter a user ID that identifies who the user is, not the function that the
user performs. For example, enter an email ID to identify the user. Do
not enter a value that specifies a function, such as operator.
Note
User ID
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
386 OL-27022-01
To Next Page
Loading...
Need help?
General
