PSTN Connection Settings
Table 59: Settings on the PSTN Connections page
DescriptionSetting
Specifies the name of the PSTN connection.
The name can include up to 37 characters in any language, but
it cannot include double-quotes ("), percentage sign (%),
ampersand (&), back-slash (\), or angle brackets (<>).
Name
Specifies the description for the PSTN connection.Description
Specifies the connection type for the PSTN connection.Connection Type
Specifies the device name for the PSTN connection.Device Name
Add PSTN Connections Information
Click the Edit link corresponding to the PSTN connection to
edit the configuration settings.
Click Show Advanced Settings or Hide Advanced Settings
to view or edit the advanced settings for the PSTN connection.
Click Save to save the changes.
Click Reset to revert to the previous saved configuration.
Edit
Click the Delete link corresponding to the PSTN connection to
delete the existing connection.
A warning message appears indicating that the connection will
be deleted and calls through that connection will be dropped.
You can choose either to delete the PSTN connection or to
cancel the operation.
Ensure that you retain minimum of one T1/E1 PSTN
connection configured with the internal gateway. The
media transcoding and conferencing will not work
properly if all the internal gateway connections are
deleted.
Note
Delete
Click Add PSTN Connection to configure a new PSTN
connection.
Add PSTN Connection
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
258 OL-27022-01
PSTN Connection Settings