Cisco IE-3000-8TC Administration Guide

Digit Discard Instructions Settings
Table 71: Edit Digit Discard Instructions Settings
DescriptionField
From the drop-down list, select the PSTN connection from which you want
to copy the manually configured digit discard instructions. The PSTN
connection for which you are configuring the digit discard instructions, also
appears in the drop-drown list.
Select the PSTN connection from the drop-down list and click Load to load
the digit discard instructions. The digit discard instruction pattern appears
in the table below.
From the drop-down list, you can also choose the PSTN connection
for which this digit discard instructions is configured.
Note
To add digit discard patterns, click + icon. To delete the digit discard pattern,
click – icon.
Click Reset to remove the connection from which the digit discard
instructions is selected.
Click Load again to load the digit discard instructions from the PSTN
connection with the updated changes during the interim.
Copy Manual Settings from
Connection
This is an optional field.
Enter the called number pattern for Digit Discard.
OR
Enter the pattern to match the called number against.
Called Number Pattern
From the drop-down list, select the number of digits to be excluded from the
beginning of the called party number.
Remove First Digits
Enter prefix digits in the Prefix Digits (Outgoing Calls) field. Valid entries
include the digits 0 through 9; the wildcard characters asterisk (*) and
octothorpe (#); the international escape character +; and blank. The ampersand
(&) and period (.) are not supported.
The final number (digits retained + prefix digits) must be equal in
length to the extension length in the system.
Note
Prefix With Digits
The final number is formed from prefixing the specified prefix to the retained
digits.
The length of the final number must be equal in length to extension
length configured for the system.
Note
Final Number
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
308 OL-27022-01
Digit Discard Instructions Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes