DescriptionField
Choose the format for the number type in called party directory numbers.
Cisco Business Edition 3000 sets the called directory number (DN) type.
Choose one of the following number types to use in calling.
• Unknown—Use when the dialing plan is unknown.
• National—Use when you are dialing within the dialing plan for your
country.
• International—Use when you are dialing outside the dialing plan for
your country.
• Subscriber—Use when you are dialing a subscriber by using a shortened
subscriber number.
Cisco recommends that you do not change the default value unless
you have advanced experience with dialing plans such as NANP or
the European dialing plan. You may need to change the default in
Europe because Cisco Unified Communications Manager does not
recognize European national dialing patterns. You can also change
this setting when you are connecting to a PBX that expects the called
directory number to be encoded to a non-national type numbering
plan.
Note
Number Type
Click Save to save the digit discard instructions to the PSTN connection.Save
Click Reset to the previously saved digit discard instructions information
for this PSTN connection.
Reset
Click to save the configured digit discard instructions.
You can modify the digit discard instructions for this PSTN
connections until you click Save on the PSTN connection
configuration page.
Note
OK
Click to cancel the digit discard instructions and return to the Outbound Call
Routing Information.
Cancel
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 309
Digit Discard Instructions Settings
To Next Page
Loading...
Need help?
General
