In the example in the previous illustration, tftp://192.168.2.251/spa$MA.cnf.xml is the TFTP
protocol where 192.168.2.251 is the IP address of the Cisco Business Edition 3000.
SPA8800 treats $MA as a placeholder for its own MAC address. $MA must be entered in capital
letters. For more information, see http://www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/ata/
provisioning/guide/Cisco_Small_Business_IP_Telephony_Provisioning_Guide.pdf.
Note
Only TFTP is supported in the current
release.
Note
Step 6
Click the Submit All Changes button.
Step 7
Reboot the SPA8800 now.
This can be done by unplugging the power cord for the SPA8800 and plugging it back in.
SPA8800 Feature Codes
The following table lists the feature codes that are supported for SPA8800.
Table 2: Supported feature codes
Code numberFeature
*07Call Redial
*66Call Back
*86Call Back Deactivate Code
*56Call Waiting
*57Call Waiting Deactivate Code
*71Call Waiting Per Call Act Code
*70Call Waiting Per Call Deact Code
*69Call Return
*84Attn-Transfer
*85Conference
SPA8800 Limitations
1
The Do Not Disturb (DND) setting cannot be configured for SPA8800 analog phones.
2
Music On Hold (MOH) is not supported on the SPA8800 analog phones.
3
Blind Transfer is not supported on the SPA8800 analog phones.
4
Call Forwarding must be set from the Cisco Business Edition 3000 and not from the SPA8800.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 25
Components of the Cisco Business Edition 3000 System
To Next Page
Loading...
Need help?
General
