Date Range and Time Zone
The following table displays the date range and time zone settings that you can use to search for call detail
records under the Summary and Call Details tabs.
Table 29: Date range and time zone settings that relate to Summary and Call Details tab
DescriptionSetting
To search for CDR information within a specific date
range, enter dates in the From and To fields; then,
click Display Data . You can also select a date from
the interactive calendars that display to the right of
the From and To fields.
Date Range
This field, which is read only, displays the time zone
for the central site where the server is located.
Time Zone
Summary Tab
The following table describes the settings that display under the Summary tab. You can search for CDR
summary information by entering specific dates.
Table 30: Settings on the Summary tab
DescriptionSetting
For the dates that you select for the date range, this
table displays the total minutes for gateway calls,
which are calls that goes through the gateway to the
PSTN. You can also view the average call per minute
and the number of calls that go through the gateway.
Table for Gateway Calls
This table displays data, including the number of
minutes per call, and so on, for all calls that have
occurred during the date range that you specify. The
call summary table includes the total number of
internal calls plus the total number of gateway calls
from the gateway calls table.
Table for Call Summary
Click this button to open the Customize Call
Classification window. In the Customize Call
Classification window you can customize how Cisco
Business Edition 3000 classifies calls for Call Detail
Reports.
Customize Call Classification
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
186 OL-27022-01
Date Range and Time Zone
To Next Page
Loading...
Need help?
General
