CHAPTER 21
Date and Time Settings
Impacted GUIs: Cisco Business Edition 3000 First Time Setup Wizard and Cisco Business Edition 3000
Administrative Interface
The Date and Time page allows you to set the system settings such as the time zone and time. The phones
and server use the information that you provide on this page; that is, the phones display the time that you
select, and the server uses the information for logs, call processing, and so on. The following table describes
the settings that display on the Date/Time page (System Settings—Date and Time).
After you complete the Cisco Business Edition 3000 First Time Setup Wizard, you access the Cisco Business
Edition 3000 Administrative Interface to update the date and time for the system (System Settings >
Date/Time).
Table 38: Settings on the Date and Time page
DescriptionSetting
This setting, which is read-only, displays the country
where your central site and server are located.
Country
This setting, which is read-only, displays the locale
that is running on your system. This setting displays
in the Cisco Business Edition 3000 Administrative
Interface.
User Locale
From the drop-down list box, select the time zone
that supports your central site. Time Zone comprises
a list of time zones for the selected region. Scroll
through the list to select the appropriate time zone.
System Time Zone (or Time Zone)
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 209