Cisco IE-3000-8TC Administration Guide

CHAPTER 11
Administrator Settings
GUI: Cisco Business Edition 3000 First Time Setup Wizard and Cisco Business Edition 3000 Administrative
Interface
The Change Password page allows you to set the administrator username and password for your system.
Administrators can perform all tasks in the Cisco Business Edition 3000 GUI, including but not limited to
adding phones, users, and monitoring the system. Anyone with the username and password can log in to the
GUIs and perform configuration tasks.
For security purposes, Cisco requires that you change the default password that comes with your system.
Enter values that are difficult to guess, and remember your new username and password because the
password does not display in the Change Password page. After you complete the Cisco Business Edition
3000 First Time Setup Wizard, you use the Cisco Business Edition 3000 Administrative Interface to
change the administrator username and password (System Settings > Administrator).
Tip
The following table describes the settings that display on the Change Password page.
Table 23: Settings on the Administrator page
DescriptionSetting
To change the username for the administrator, enter
a new value in the Username field.
Username
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 169

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes