Time Setup Wizard. If you upload the file, you bypass the configuration pages in the Cisco Business Edition
3000 First Time Setup Wizard, and the wizard immediately takes you to the Summary page where you can
confirm your data.
After the server restarts at the end of the Cisco Business Edition 3000 First Time Setup Wizard, you can log
into the Cisco Business Edition 3000 Administrative Interface and verify that your data got added to Cisco
Business Edition 3000. If you include user and phone data in the Cisco-provided .xls data configuration file,
the Cisco Business Edition 3000 Administrative Interface allows you to import the users and phones and then
informs you of import errors.
If you do not want to upload the Cisco-provided .xls data configuration file when you run the Cisco
Business Edition 3000 First Time Setup Wizard, consider entering your data in the file and using it as a
guide when you manually enter the information on the GUI pages.
Tip
For example, during your initial deployment, you inserted 25 users and phones; now, you must insert 25 more
users and phones. To accomplish this task, you can modify the Cisco-provided .xls data configuration file
that you used for automatic setup during the Cisco Business Edition 3000 First Time Setup Wizard or you
can obtain a new Cisco-provided .xls data configuration file and add your new users and phones to that new
spreadsheet.
Be aware that when you download the localized spreadsheet on the Cisco Business Edition 3000, the
options in the Advanced Options drop-down menu for various functionalities may remain in English. Only
the non-technical texts and the non-reserved strings will be translated to the chosen locale. For example,
PRI 4ESS, PRI 5E8, SFTP, CentralSite, and Remote Site remains in English.
Note
Cisco recommends that all users set their supported browsers to the desired locale version that is available
in the installed country pack version, so that the text displays as expected.
Note
Do not use the Cisco-provided .xls data configuration file to modify your configuration data. Cisco Business
Edition 3000 only supports the Cisco-provided .xls data configuration file for the initial deployment and
for bulk insertion (adding) of users and phones after the initial deployment. For example, if you attempt
to update existing user and phone information through the Cisco-provided .xls data configuration file, the
updates fail.
Caution
Considerations for Using the Cisco-provided .xls Data Configuration File
Before you complete the Cisco-provided .xls data configuration file, review the considerations in the following
sections:
• For Both the Initial Deployment and Bulk Insertion of Users and Phones After Initial Deployment, on
page 77
• For the Initial Deployment Only, on page 77
• For Bulk Insertion of Users and Phones After Initial Deployment, on page 78
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
76 OL-27022-01
Considerations for Using the Cisco-provided .xls Data Configuration File
To Next Page
Loading...
Need help?
General
