Cisco IE-3000-8TC Administration Guide

Provider
Table 63: Settings on the Service Provider Page
DescriptionSetting
Specifies the service provider who adequately supports Cisco
Business Edition 3000 server. The service provider provides a
list of attributes for specific connection settings and the default
layout for the respective Connection Settings page.
The following are the service providers for Cisco Business Edition
3000:
• Cisco Digital Access E1 PRI (if the Connection Type is EI
PRI)
• Cisco Digital Access T1 PRI (if the Connection Type is TI
PRI)
• Cisco Digital Access T1 CAS (if the Connection Type is
T1 CAS)
• Cisco Unified Border Element (CUBE)(default, if the
Connection Type is SIP Trunk)
• Cisco Digital Access E1 R2 (if the Connection Type is E1
R2)
If you have installed a Connection Pack, the associated
service provider name will appear in the list.
Note
• SPA8800 (if the Connection Type is FXO)
Click Next to go to the Connection Settings page.
Provider
Connection Settings
The following table describes the settings on the connection settings page for General section.
Table 64: Settings on the Connection Settings page for General section
DescriptionSetting
Displays the name of the PSTN connection.Connection Name
Displays the description provided for the PSTN
connection. You can enter a new description if
required.
Description
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
262 OL-27022-01
Provider

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes