Cisco IE-3000-8TC Administration Guide

DescriptionSetting
If this field displays, enter the MAC address for the
phone, which is 12 hexadecimal characters. You can
find the MAC address on the back of your phone.
You cannot update this field in the Edit Phone page.
MAC Address
If this field displays, enter any value that you want
to indicate the device name.
This field displays for some phones, including Cisco
IP Communicator and Cisco Unified Client Services
Framework.
You cannot update this field in the Edit Phone page.
Identifier
If this field displays, enter the MAC address for the
Cisco VG224 Analog Phone Gateway.
You cannot update this field in the Edit Phone page.
Gateway MAC Address
If this field displays, select the port that you plan to
use when you connect the Cisco VG224 Analog
Phone Gateway to the system.
You cannot update this field in the Edit Phone page,
and only the ports that are available for use display
in the list.
To create the device name for the Cisco
VG224 Analog Phone Gateway, Cisco
Business Edition 3000 automatically uses the
values that you enter in the Gateway MAC
Address and the Port Number fields.
Tip
Port Number
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
250 OL-27022-01

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes