Cisco IE-3000-8TC Administration Guide

DescriptionSetting
Choose whether you want the Cisco Business Edition 3000 to allow
or restrict the display of the calling party name on the called party
phone display for this SIP route pattern.
Choose one of the following:
• Default—If you do not want to change calling name
presentation.
• Allowed—If you want Cisco Business Edition 3000 to display
the calling name information.
• Restricted—If you want Cisco Business Edition 3000 to block
the display of the calling name information.
Calling Name Presentation–Outgoing
Check this check box to route a local call through this trunk using
subscriber number only. Long distance calls through this trunk will
be routed without the country code.
If this check box is unchecked, all calls placed through this trunk
will comprise a complete national number with the country code.
This feature is available on all SIP trunk
connections.
Note
Discard Digits Enabled
Choose whether you want the Cisco Business Edition 3000 to allow
or restrict the display of the calling party phone number on the called
party phone display for this SIP route pattern.
• Default—If you do not want to change calling line ID
presentation.
• Allowed—If you want Cisco Business Edition 3000 to allow
the display of the calling number.
• Restricted—If you want Cisco Business Edition 3000 to block
the display of the calling number.
Connected Line ID
Presentation–Incoming
Choose whether you want the Cisco Business Edition 3000 to allow
or restrict the display of the calling party name on the caller party
phone display for this SIP route pattern.
Choose one of the following:
• Default—If you do not want to change calling name
presentation.
• Allowed—If you want Cisco Business Edition 3000 to display
the calling name information.
• Restricted—If you want Cisco Business Edition 3000 to block
the display of the calling name information.
Connected Name
Presentation–Incoming
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
288 OL-27022-01
Connection Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes