DescriptionSetting
Click Switch Version when you are finished
upgrading to a newer software version or when you
need to fall back to the previously installed software
version.
Clicking Switch Version causes the system
to restart and become temporarily out of
service. Clicking Switch Version may drop
calls that are in progress.
Tip
If you click Switch Version, the system restarts, and
the version that is currently inactive becomes active.
The system takes approximately 60 minutes
to switch versions after the upgrade, and
almost 30 minutes for subsequent switches
of versions.
Note
Switch Version
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
318 OL-27022-01