Cisco IE-3000-8TC Administration Guide

DescriptionSetting
Click Automatic Setup to set the system settings from the
Cisco-provided .xls data configuration file. You can either upload
the Cisco-provided .xls data configuration file from your desktop
or from a USB flash drive. Values in the subsequent pages are loaded
with the information that you provide in the Cisco-provided .xls data
configuration file. If a value is not in the file, the system uses the
default value.
The Cisco-provided .xls data configuration file must be a Microsoft
Excel file (.xls), which you can obtain from www.cisco.com.
The system reads data from the .xls file, and you can confirm the
data on the wizard Summary page.
The system cannot read the data if you have changed the
order of the settings in the file or changed the file
extension.
Caution
The data does not get added toCisco Business Edition 3000 until
after the server restarts at the end of the wizard. Cisco recommends
that after you restart the server, access the Cisco Business Edition
3000 Administrative Interface to determine whether configuration
data got added to the system; for example, if you add user and phone
data to the Cisco-provided .xls data configuration file, the Cisco
Business Edition 3000 Administrative Interface immediately displays
important information about phone and user insertion after you log
into the interface.
Automatic Setup
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
328 OL-27022-01

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes