DescriptionField
Select this option to manually route the PSTN calls using a
custom dial plan. You can edit the dial plan pattern.
• Edit Dial Plan Patterns—Click to edit the dial plan
pattern for the PSTN connection.
For information about the settings on the dial plan
patterns page, see Dial Plan Pattern Settings, on page
355.
• Edit SPA Dial Plan—Click to edit the dial plan for the
SPA connection.
This link is not available if there is no SPA
connection type configured on your system.
Note
The Edit SPA Dial Plan window allows you to set the
number patterns that Cisco Business Edition matches
against the called numbers received from a SPA
gateway in order to determine whether to route the call.
For information about the settings on the dial plan
patterns page, see SPA Dial Plan Patterns, on page 358.
Route using a custom dial plan
From the drop-down list, select the outside dial code to use
for redial and click-to-call calls from this site.
Ensure that you select a valid connection group for
this outside dial code for the PSTN calls to work
correctly.
Note
Default Outside Dial Code
Call Quality Tab
Call Between Sites Information
Select the amount of span that you are leasing from your
service provider for your Internet and intranet connectivity.
Bandwidth Between Sites
Check box to enable video calls between sites.
Disabled for Teleworker
sites.
Note
Video: Enable Video Calls Between Sites.
Point to point video is not supported
within the teleworker site or between
the teleworker site and any other site
connected to the teleworker site.
Note
Select the percentage of span that you want to make available
for audio between sites; for example, between the central and
remote site. The rest of the span gets used for data
communication between sites.
You can use the slider to select the value or enter in the field
provided.
Bandwidth Allocation for Audio and Video
Point to point video is not supported
within the teleworker site or between
the teleworker site and any other site
connected to the teleworker site.
Note
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
352 OL-27022-01
Configure Remote User Site
To Next Page
Loading...
