Dial Plan Pattern Settings
Table 86: Settings on the Dial Plan Patterns Page
DescriptionField
View Dial Plan Patterns Information
Select the dial pattern from the drop-down list and click Load to load the
dial plan from a different site. The details of the selected dial plan pattern
display in the Dial Plan Patterns section.
Click Load again to load the dial plan from the site with the updated
changes during the interim.
The dial plan pattern appears in the Dial Plan Patterns area.
If there are no other sites configured in the system, the option to
load dial plan pattern settings will not be available.
Note
A progress bar indicates the status of loading the dial plan patterns to this
site. If you refresh or open a new browser window to access the
Administrative Interface or the User Preferences Interface while the
pattern is updated, a message displays that the system update is currently
in progress and the administrative interface will not be available until the
dial plan patterns are updated.
If there is a failure while loading the dial plan patterns, system restarts to
recover.
Copy from Site
Dial Plan Patterns Information
Choose the option from the drop-down list to filter the dial plans selected
based on the following categories:
• Pattern
• Class of Service
• Call Handling
• Routing Destination
• Description
Filter
Specifies the pattern of the dial plan.Pattern
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 355
Dial Plan Pattern Settings
To Next Page
Loading...
