Cisco IE-3000-8TC Administration Guide

Delete SPA8800 connections from the PSTN Connections page 20
Configure the SPA8800 Analog Phones on the Cisco Business Edition 3000
GUI 21
Add a SPA8800 analog phone from the Phones page 21
Edit a SPA8800 analog phone from the Phones page 21
Delete a SPA8800 analog phone from the Phones page 22
Edit SPA8800 devices from the Devices page 22
Delete SPA8800 devices from the Devices page 22
DID and ELIN configuration 22
PSTN Connection Settings 23
Perform the Initial Setup on the SPA8800 for IP Addresses using SPA Interactive
Voice Response 23
Configure settings for TFTP on the SPA8800 GUI 24
SPA8800 Feature Codes 25
SPA8800 Limitations 25
SIP Trunking 26
Limitations of SIP Trunking 27
E1 R2 Connections 28
Connection Pack 28
Installing the Connection Pack File 29
Carrier Selection Profiles for Brazil 30
Connection Groups 31
Best Practices for Using DHCP for Acquiring IP Addresses 32
IP Addressing 32
DNS and Hostname Resolution 33
SFTP Server 33
Support for Computer Telephony Integration 34
Support for Voicemail with Email Integration 34
Common Configuration Concepts in Cisco Business Edition 3000 35
Network Settings 35
Dial Plans 36
Sites 39
Remote Management of Cisco Business Edition 3000 using Cisco OnPlus 42
Signing on to Cisco Business Edition 3000 using Cisco Onplus 43
Usage Profiles 44
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
iv OL-27022-01
Contents

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes