DescriptionSetting
This setting specifies how an incoming call displays
on a phone when Do Not Disturb is turned on. This
setting works with the Option setting.
From the drop-down list, choose one of the following
options:
• Disable—This option disables both beep and
flash notification for a call, but for the Ringer
Off option, incoming call information still gets
displayed. For the Call Reject option, no call
alerts display, and no information gets sent to the
device.
• Beep Only—For an incoming call, this option
causes the phone to beep.
• Flash Only—For an incoming call, this option
causes the phone to display a flash alert.
This setting only applies for phones where
you turned on Do Not Disturb. You turn
on Do Not Disturb in the phone
configuration (Users/Phones > Phones)
or on the phone itself.
Tip
Default—Beep Only
Incoming Call Alert
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
OL-27022-01 405
To Next Page
Loading...
