ICS-3000 Ion Chromatography System
4 Doc. 065031-04 1/08
ICS-3000 Conductivity Detector (CD)
The CD is a modular detector with integrated cell providing dual
detection capabilities (series or parallel). The CD has a signal range up to
15,000
μS and supports high background, nonsuppressed applications.
The CD is installed in the upper compartment of the DC.
ICS-3000 Electrochemical Detector (ED)
The ED is a modular detector and cell with dual-detection capabilities
(series or parallel). The ED supports multiple waveforms, multiple
integration times, and post-analysis data manipulation. The ED is also
capable of providing 3D amperometry data. The ED cell can be
configured with gold, silver, platinum, or glassy carbon working
electrodes. The ED is installed in the upper compartment of the DC.
ICS-3000 Automation Manager (AM)
The AM consists of a component mounting panel on a base tray. The AM
provides mounting sites for sample preparation and post-column
application components: high-pressure (switching) valves, low-pressure
(solenoid) valves, reaction coils, etc. The AM is installed in the upper
compartment of the DC, above the detector.
ICS-3000 Thermal Compartment (TC)
The TC provides a temperature-controlled environment for ICS-3000
chromatography components. The TC is intended for applications that do
not require conductivity or electrochemical detection.
The TC is available in four configurations:
• With one 2-position, 6-port high-pressure injection valve
• With two 2-position, 6-port high-pressure injection valves
• With one 2-position, 6-port high-pressure injection valve and one 2-
position, 10-port high-pressure injection valve
• With no injection valves
An optional temperature stabilizer (standard bore, P/N 064548;
microbore, P/N 064650) can be installed inside the TC, if necessary. The
temperature stabilizer brings the eluent to the column temperature before
it enters the column.
To Next Page
Loading...
