Doc. 065031-04 1/08 335
A • Specifications
DP/SP Specifications
A.1 Electrical
A.2 Environmental
A.3 Physical
Main Power
Requirements
90 to 120 VAC, 47 to 63 Hz
200 to 240 VAC, 47 to 63 Hz
(Auto-sensing power supply; no manual voltage or frequency
adjustment required)
Typical input power: 28 W
Maximum line draw: 1.2 A at 110 VAC
Fuse
Requirements
Two IEC 60127-2 slow-blow fuses (P/N 954773) rated at 2 A,
250 V
Operating
Temperature
4 to 40 °C (40 to 104 °F)
Operating
Humidity
5% to 95% relative humidity (noncondensing)
Dimensions Height: 40.6 cm (16 in)
Width: 22 cm (8.75 in)
Depth: 55.9 cm (22 in)
Minimum required clearance behind the pump: 6 cm (2.5 in)
Weight DP: 25 kg (55 lbs)
SP: 20 kg (45 lbs)
To Next Page
Loading...
